Pencil grip stained glass cutters

This makes stained glass beautiful art. The sides are then sliced apart and formed into slabs which are slightly thinner at the edges and thicker in the center. Adding gold produces a beautiful ruby color Cobalt creates most shades of blue. Cutters in hardware stores are generally made specifically for cutting clear glass. Starts and stops will only cause a bad score line which will end up in a bad break. You should replace the tip often to keep your projects flowing smoothly and to help keep your joints neat and clean. Chromium and iron oxides can also create green shades. Golden, yellow and vermillion glass is sometimes created by using uranium, cadmium sulfide or titanium. They will eventually get dull or even nicked and have to be replaced; but, you can replace the wheel only and not have to get a whole new cutter. It would also have an iron coated or plated tip to make it long lasting and easy to use.

The ideal soldering iron would have a temperature control keeping it at a constant level between 100 and 200 watts.If you want the proper cutter for stained glass, it is best to go to a stained glass supplier.

Carbide wheels cost more but last longer than steel Paper Packing UV Varnish wheels.

Pencil grip stained glass cutters have a ball on one end which is used to tap the stained glass underneath the score line to begin a running break so that the glass can be pulled apart. Going over a score line twice dulls your stained glass cutter and makes a bad score line. Stained glass that has been scored can be pulled apart by hand; but sometimes, the glass pieces are too small to grip.

Various metal oxides are added to produce different colors of stained glass. The tip should measure about 1/4 inch and be comparable to a flat tip screw-driver in shape. Larger manufacturers use much the same techniques, but the mixing and shaping processes are done with large machines instead of by hand.

A good score is done in one continuous motion.

Since stained glass making is such a fine art much attention is paid to the type, colors and quality of glass used and/or the quality of the paint used on the glass.
.

One process that is used for making Cathedral glass is done by rolling the molten glass into flat sheets. Copper oxide is very versatile and depending on the conditions it is used under it can create ruby red, bluish or green colors. Then there are the “Norman slabs” which are created by blowing the molten glass into a rectangular box shaped mold. The right soldering iron and type of solder can make the difference in the overall quality of the finished stained glass window or other project, however, and should be given more attention. The soldering iron, while absolutely crucial to the outcome of the project is often given little or no consideration and attempts to use one borrowed from a friend or found in the tool bin in the garage are often made. Glass pliers can be used to separate the pieces that are too small to grasp.